first commit

Software/Python/grove_ir_receiver/README.md

@@ -0,0 +1,18 @@
+##IR remote control
+
+### This folder contains the files to setup and use the Keyes IR remote with the GrovePi
+
+**_Files:_**
+- **ir_recv_example.py** : Used to test button press on the IR remote
+- **/script/ir_install.sh** : Installation file for IR remote control
+
+**Connection:_**
+Connect the IR receiver to the RPi serial port on the GrovePi. This will act as a pass through to the IR signals to the Serial pins. 
+IR receiver Hardware v1.0 and back have the IR receiver connected to white wire and v1.1 and v1.2 have it connected to the Yellow wire, so the GPIO changes
+
+**Installation:_**
+- Make the ir_install.sh executable: sudo chmod +x ir_install.sh
+- Run the install script: sudo ./ir_install.sh
+
+**Usage:_**
+Run the **ir_recv_example.py** to check if the remote is working properly