37 lines
1.2 KiB
Markdown
37 lines
1.2 KiB
Markdown
## **Mine Controls.**
|
|
|
|
|
|
|
|
### What is it?
|
|
Mine Controls are custom hardware controls for Minecraft and the Raspberry Pi! In this project we show you how to build a custom controller for Minecraft using the Raspberry Pi and the GrovePi. You can get [all the hardware for this project from the Dexter Industries website.](http://dexterindustries.com/grovepi)
|
|
|
|
|
|
### Setup
|
|
See the [full project description for making a custom Minecraft controller for your Raspberry Pi here](http://www.dexterindustries.com/projects/custom-minecraft-controller/).
|
|
|
|
Software Setup:
|
|
Before we begin, run the following commands to setup:
|
|
`sudo apt-get install minecraft-pi `
|
|
|
|
`sudo pip3 install python3-xlib`
|
|
|
|
`sudo pip3 install pyautogui`
|
|
|
|
|
|
Hardware Setup:
|
|
Setup the GrovePi on the Raspberry Pi.
|
|
Connect a touch Sensor to port A0.
|
|
Connect a Joystick to port A2.
|
|
Connect a touch sensor to Port D3.
|
|
Connect a touch sensor to Port D4.
|
|
|
|
To run:
|
|
1. Start Minecraft on the Pi.
|
|
2. Start a world.
|
|
3. Start Python3 (IDLE).
|
|
4. Open this file (GrovePi-Controller.py)
|
|
5. Click "Run" --> "Run Module"
|
|
6. Click back into Minecraft.
|
|
|
|
|
|
See more at the [Dexter Industries](http://dexterindustries.com/).
|